- Ie Open Local File
- File Explorer Default View
- .lnk File Open With Internet Explorer
- Lnk Files Not Opening
- Open Lnk Files Windows 7
This article helps you resolve the problem that the webpage can't be opened when you click a hyperlink in Internet Explorer.
- Acrobat and Adobe Reader install ActiveX plug-in files that allow you to use Internet Explorer or AOL to open PDF files. If either application is installed, but PDF files don't open in the browser window, then work through the following steps to configure the browser: 1. Make sure that the system meets the requirements for the Acrobat product.
- I am facing a virus problem in my Windows 7. The problem comes from when I open a downloaded file with VLC option. After choosing the file to open with option, all my icons (Torrent, Internet Explorer and all other installed icons) changed to VLC. When I clicked the VLC file, it shows.ink extension.
So yesterday I did something stupid. I managed to change the default program for all of my.lnk files to Internet Explorer. I'm running Win 7 (64). When I double-click any file on my desktop it attempts to open the file with Internet Explorer. Same goes for most program files in my start menu.
Original product version: Internet Explorer 9
Original KB number: 175775
Symptoms
When you click a hyperlink on a webpage or in an email message, nothing happens. Internet Explorer does not open the webpage.
Note
This information applies to Internet Explorer 9, Internet Explorer 8, and Internet Explorer 7.
Cause
This can happen for one or more of the following reasons:
- The setting where you choose what web browser that you want to use is corrupted. This can cause Windows to misinterpret which browser is set as the default browser on your computer.
- After software was installed, settings were changed, which can cause links to webpages to work incorrectly.
- A previously installed browser or add-in might be interfering with other software on your computer.
- Registry keys were changed or became corrupted.
Resolution
This section is intended for a beginning to intermediate computer user. If these methods do not resolve the problem, you can try the methods in the Advanced troubleshooting section. To resolve the problem, use the following methods in the order in which they are presented.
Method 1: Check your default web browser setting
In Microsoft Windows, you can select which web browser that you want to use. To make Internet Explorer your default web browser, follow these steps:
- To open Internet Explorer, click Start, and then click Internet Explorer.
- If you are prompted to confirm that you want Internet Explorer to be your default browser, click Yes.
- On the Tools menu, then click Internet Options.
- Click the Programs > Make default > OK, and then close Internet Explorer.
Note
Your changes will take effect the next time that you start Internet Explorer.
Check whether the problem is resolved. If the problem is resolved, you are finished with this article. If the problem is not resolved, try the next method.
Method 2: Change the file types that Internet Explorer opens by default
For Windows 7 and Windows Vista.
- Close all Internet Explorer windows.
- Click Start, and then click Control Panel.
- Click Programs, and then click Set your default programs.
- On the Programs menu, click Internet Explorer, and then click Choose defaults for this program.
- Make sure that the check boxes for
.htm
,.html
, andurls
are selected, and then click Save. - Click OK.
Note
Your changes will take effect the next time that you start Internet Explorer.
For Windows XP
To open Windows Explorer, right-click Start, and then click My Computer.
On the Tools menu, click Folder Options, and then click the File Types tab.
Locate and select the HTM file type.
Make sure that Internet Explorer is selected as the Opens with program. If Internet Explorer is not selected, click Change, select Internet Explorer as the recommended program, and then click OK.
Repeat steps 3 and 4 for the following file types:
HTML
ITS
MHT
MTHML
XML
XSL
Check whether the problem is resolved. If the problem is resolved, you are finished with this article. If the problem is not resolved, go to the next method.
Method 3: Use the Internet Explorer No Add-ons mode
Although browser add-ins can improve your online experience, they can occasionally interfere or conflict with other software on your computer. However, be aware that some webpages, or Internet Explorer itself, might not be displayed correctly if an add-in is disabled. First, start Internet Explorer with add-ins temporarily disabled to see whether the problem is resolved. (Add-ins will be disabled only until you restart Internet Explorer in the usual manner). To do this, follow these steps:
Click Start, type Internet Explorer in the Search box, and then click Internet Explorer (No Add-ons).
Note
For Windows XP, click Start , right-click the Internet Explorer icon, and then click Browse without add-ons.
If Internet Explorer No Add-ons mode resolves the problem, follow these steps to identify the browser add-in that is causing the problem:
- To start Internet Explorer, click Start, and then click Internet Explorer.
- Click the Tools button, and then click Manage add-ons.
- Click an add-in in the Name list, and then click Disable. Test Internet Explorer.
- Repeat step 3 until you identify the add-in that is causing the problem.
Check whether the problem is resolved. If the problem is resolved, you are finished with this article. If the problem is not resolved, try the next method.
Method 4: Reset Internet Explorer settings
If the problem is caused by damaged or incompatible Internet Explorer settings or add-ins, you can usually resolve the problem by resetting Internet Explorer settings to the default settings.
When you reset the Internet Explorer settings, all previous settings are lost and cannot be recovered. When you restore the Internet Explorer default settings, some webpages that rely on stored cookies, form data, passwords, or previously installed browser add-ins might not work correctly. However, resetting Internet Explorer to the default settings does not delete your favorites, feeds, and several other personal settings.
To reset Internet Explorer Settings, follow these steps:
Close all Internet Explorer windows.
Click Start, type inetcpl.cpl in the Search box and then click inetcpl.cpl on the Programs list.The Internet Options dialog box appears.
Note
for Windows XP, click Start, click Run, type inetcpl.cpl in the Open box, and then click OK.
Click the Advanced tab.
Under Reset Internet Explorer Settings, click Reset. Then, click Reset again.
When Internet Explorer finishes resetting, click Close in the Reset Internet Explorer Settings dialog box.
Start Internet Explorer again. Your changes will take effect the next time that you open Internet Explorer.
Method 5: Re-register the necessary Internet Explorer DLL files
To Re-register the DLL files, follow these steps:
Click Start, click All Programs, click Accessories, right-click cmd, and then select Run as administrator. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Type regsvr32 urlmon.dll in the Open box, and then click OK.
Click OK when you receive the confirmation.
Repeat steps 2 and 3 for the following commands:
regsvr32 mshtml.dll
regsvr32 shdocvw.dll
regsvr32 browseui.dll
regsvr32 msjava.dll
Check whether the problem is resolved. If the problem is resolved, you are finished with this article. If the problem is not fixed, go to the next section.
Advanced troubleshooting
This section is intended for more advanced computer users.
Method 1: Create a new user account
For more information about user profiles, see About User Profiles.
For method details, go to the following Microsoft websites:
- Fix a corrupted user profile in Windows.
Method 2: Use System Restore
System Restore uses restore points to return your system files and settings to an earlier point in time without affecting your personal files. Restore points are created automatically every week and just before significant system events, such as the installation of a program, a device, or a driver.
Before you start System Restore, save any open files and close all programs. After you confirm your restore point, System Restore restarts your computer. To perform a System Restore, follow these steps:
For Windows 7 and Windows Vista
Click Start, click All Programs, click Accessories, click System Tools, and then click System Restore. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Click Next on the System Restore page.
Select the system restore date or description that you want.
Note
If you don't see the specific date that you are looking for, select Show more dates , and then select the date that you want.
In the confirmation window, click Finish. Your computer will restart. When the process is complete, you will receive a confirmation message.
For Windows XP
- Log on to Windows by using an account that has administrative permissions.
- Click Start, click All Programs, click Accessories, click System Tools, and then click System Restore.
- On the Welcome to System Restore page, select the Restore my computer to an earlier time option, and then click Next.
- On the Select a Restore point page, click the most recent system restore point on This List, click a restore point list, and then click Next.
- On the Confirm Restore Point Selection page, click Next. System Restore restores the previous windows XP configuration and then restarts the computer.
- Log on to the computer as an Administrator. Then, click OK on the system Restore Restoration Complete page. Your computer will restart. When the process is complete, you will receive a confirmation message.
If you use System Restore but the problem still occurs, or other problems occur, you can undo the restore operation. After you undo the operation, you can try using a different restore point. To undo a System Restore operation, follow these steps:
- Click Start, click All Programs, click Accessories, click System Tools, and then click System Restore.
- Click Undo System Restore, and then click Next.
- Review your choices, and then click Finish.
Ie Open Local File
Your computer will restart. When the process is complete, you will receive a confirmation.
Additional Resources
Check whether the problem is resolved. If the problem is resolved, you are finished with this article. If the problem is not resolved, you can also use Microsoft Customer Support Services to find other solutions. Microsoft Support services include the following methods:
- Search the Microsoft Knowledge Base: Find technical support information and self-help tools for Microsoft products.
- Solution Centers: View product-specific, frequently asked questions, and support highlights.
- Microsoft Community: Contact counterparts, peers, and Microsoft Most Valuable Professionals (MVPs).
- Other support options: Ask a question, contact Microsoft Customer Support Services, or provide feedback.
![Lnk Files Open With Internet Explorer Lnk Files Open With Internet Explorer](http://malwaretips.com/blogs/wp-content/uploads/2012/10/reapir-lnk.jpg)
Before you start System Restore, save any open files and close all programs. After you confirm your restore point, System Restore restarts your computer. To perform a System Restore, follow these steps:
For Windows 7 and Windows Vista
Click Start, click All Programs, click Accessories, click System Tools, and then click System Restore. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Click Next on the System Restore page.
Select the system restore date or description that you want.
Note
If you don't see the specific date that you are looking for, select Show more dates , and then select the date that you want.
In the confirmation window, click Finish. Your computer will restart. When the process is complete, you will receive a confirmation message.
For Windows XP
- Log on to Windows by using an account that has administrative permissions.
- Click Start, click All Programs, click Accessories, click System Tools, and then click System Restore.
- On the Welcome to System Restore page, select the Restore my computer to an earlier time option, and then click Next.
- On the Select a Restore point page, click the most recent system restore point on This List, click a restore point list, and then click Next.
- On the Confirm Restore Point Selection page, click Next. System Restore restores the previous windows XP configuration and then restarts the computer.
- Log on to the computer as an Administrator. Then, click OK on the system Restore Restoration Complete page. Your computer will restart. When the process is complete, you will receive a confirmation message.
If you use System Restore but the problem still occurs, or other problems occur, you can undo the restore operation. After you undo the operation, you can try using a different restore point. To undo a System Restore operation, follow these steps:
- Click Start, click All Programs, click Accessories, click System Tools, and then click System Restore.
- Click Undo System Restore, and then click Next.
- Review your choices, and then click Finish.
Ie Open Local File
Your computer will restart. When the process is complete, you will receive a confirmation.
Additional Resources
Check whether the problem is resolved. If the problem is resolved, you are finished with this article. If the problem is not resolved, you can also use Microsoft Customer Support Services to find other solutions. Microsoft Support services include the following methods:
- Search the Microsoft Knowledge Base: Find technical support information and self-help tools for Microsoft products.
- Solution Centers: View product-specific, frequently asked questions, and support highlights.
- Microsoft Community: Contact counterparts, peers, and Microsoft Most Valuable Professionals (MVPs).
- Other support options: Ask a question, contact Microsoft Customer Support Services, or provide feedback.
Most of the people double click on external devices like flash drive, external HDD, pen drive, memory card and due to which sometimes we get into trouble either serious one or simpler one. We can't expect everyone to open any executable thing with caution and do right click then use explore while opening external devices. I would try to provide a basic solution to one problem which seems to be common in Vista, Win 7 (I have tested on these right now).
At the moment you tried double click on external devices, it will try to associate .lnk (shortcuts) files with Microsoft Internet Explorer (MS IE) without even notifying you (See the gievn image to understand what I meant) .
Symbolic link means shortcut icon here, which means, if you click on any such shortcut icon like kmplayer, msword etc, it will open IE or control panel as such. It is very easy to spread such annoying pranks, but almost impossible to remove it if you are not from computer background. (How many of you pay with regedit often?). This is because there is no possibility for the user to 'unlink' a file extension and put it back to its original symbolic link.
Problem: All shortcut icons, both on the desktop and in the start menu are changed to Microsoft Internet Explorer Icon after accessing external devices. When clicking on them a Save as dialog opens or opens IE or open control panel. The problem is that the .lnk file extensions of all files have been associated with Microsoft Internet Explorer.
File Explorer Default View
Solution: You need to tackle with a hidden monster called 'registry editor'. Perform any action with great care which is associated with registry editor and remember the changes, as it involves manually editing the system registry. If you do a simple mistake here, it may cause your even crash your memory (not generally). If you feel unsure, get help from an experienced computer expert (like me 😉 ). Better take back of registry editor then perform any action.
.lnk File Open With Internet Explorer
Steps to recover back all original icons:
- Open run command by pressing windows key (windows logo) and R together.
- Type 'regedit' and press enter.
- Browse the computer system registry into
- 'HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerFileExts.lnk' (It may take time to reach there, so be patient)
- Delete all subfolders under '.lnk' directory but please never ever delete the '.lnk' folder.
- Close registry editor (regedit).
- The shortcuts on your desktop will still not work now although clicking on it will work fine. So better reboor your system.
Lnk Files Not Opening
Bingo! You are done. You solved a mystery case here. Now say me thanks with your comments 😛Open Lnk Files Windows 7
Image Source: One of my friend's laptop 😛